possible liftoff

The crew of space shuttle Atlantis on their first day in orbit Friday trained a camera on the spaceship's thermal shield to search for any damage from a loose piece of insulation that broke off during liftoff, NASA said.
The Atlantis crew of seven trained a high-definition camera perched on the shuttle's robotic arm on areas that included the nose and wing of the craft, Mission Management Team Chairman John Shannon told reporters, as space craft headed for its rendezvous with the International Space Station.
Shannon said three small "foam losses" from the shuttle Atlantis' external fuel tank were filmed at 110 seconds, 112 seconds and 7.2 minutes after liftoff Thursday.
While the first two pieces appeared to have missed the shuttle, Shannon said, the third one may have struck the underside of the craft, although its mass and speed were too small, given the altitude at the time, to cause any damage to the heat tiles.
"So, from an ascent stand point, what we have seen so far from the ground cameras and the onboard cameras, it looks like we had an extremely clean launch and ascent," he said.
"We have a long way to go on this mission but I absolutely could not have asked for a better start," he said, adding however that the full data from the shuttle camera inspection would be available on Saturday.
The shuttle will receive a more complete inspection when it approaches the International Space Station on Saturday, and spins around completely while the ISS astronauts take video images of its entire thermal shield.
Scrutinizing the shuttle's heat shield became established procedure after the February 2003 shuttle Columbia disaster. A piece of foam insulation broke off during Columbia's liftoff, damaging the shuttle's external heat tiles and leading to the craft's destruction when it re-entered the Earth's atmosphere.
Shannon said the Mission Management Team would meet at 2400 GMT Saturday to "decide if there is any reason to do any kind of focused inspection.
"Right now we don't see any need for that, but of course we'll look at the data very closely."
Docking with the ISS is scheduled for 1725 GMT on Saturday.
The shuttle, whose crew includes a French and a German astronaut, is on an 11-day mission to deliver the European-made, 10-ton Columbus laboratory, the first ISS addition not made in the United States or Russia.
The astronauts will use the ISS's robot arm to transfer Columbus out of the shuttle's payload bay and attach it to the space station.
Three spacewalks are scheduled during the mission, which is seen as a major step forward for European ambitions in space.
The Atlantis crew includes astronauts Leopold Eyharts of France and Hans Schlegel of Germany. Currently US and Russian astronauts are aboard the space station.
Schlegel will conduct two spacewalks during the flight to connect power and fluid lines between Columbus and the ISS.
Eyharts will begin Europe's second longest stay on the space station by replacing US astronaut Dan Tani. The German astronaut of ESA, Thomas Reiter, stayed six months in the station in 2006.
Atlantis was originally scheduled for blastoff on December 6 as part of the tight schedule of shuttle flights to complete ISS construction by 2010, when the three-craft US shuttle fleet is to be retired.
But malfunctioning circuits in the fuel gauges of the spacecraft's liquid hydrogen tank forced a two-month delay until the problem was fixed.

Home Assembly Jobs

If you are a person who loves to work with your hands, you may be someone who thinks they could never find a job from home. Then you see those home assembly jobs advertised in the newspaper and online. It sounds tempting, right? Sure. The ads are written to be tempting, but they are almost all scams. Here are some ways to avoid the scams that peak our curiosity:First you should learn about scams. Know what the common scams out there look like. Home assembly jobs are just one common scam, but so is envelope stuffing or money transfer scams. The reason they are so tempting has to do with our own desire to make money fast using little skill. Almost all of these work from home scams prey on our desire to make money quickly. The ads are written using language that leads us to believe we can make thousands of dollars doing simple tasks. They usually tell you that there are no skills necessary to make the money. Then they often provide a large dollar amount and a few hours a week.Some of these scams even create websites that have 'testimonials' about how 'So-and-So' made thousands doing just a few hours of work per week. Unfortunately, anyone can make up testimonials and buy pictures of people. Testimonials are a common advertising ploy, but with home assembly jobs they should really be questioned.What many of the work at home assembly ads do not tell you is that there will be a fee involved for the 'supplies' needed to complete the tasks. You will be send those supplies, which are never of the quality outlined in the advertisement. They usually come with vague directions about what you need to assemble. Sometimes you will be required to buy some of your own supplies, too. The key to the home assembly jobs scams is that once you spend the money to send in your beautifully crafted objects, you will be told that they are not up to par. If you read closely, the company probably has a disclaimer that the crafts have to meet expectations for payment. No matter how simple the craft may be, it is not likely to ever 'meet expectations.' So now you are out money and time. That is what these home assembly jobs scams do. They steal your money and your time. If you like to work with your hands you are better off starting your own home based business doing the things you love to do with your hands. Your own business may cost you money to start up, but you will find that you will at least be in control of your money and not handing it off to someone who is planning to steal it.